#316, 24.3' x 8.2'

Lineage:

This is one of several skiffs in the 22 to 24' range that have been built by Winninghoff Boats in various configurations. For more on this hull's history with Winninghoff, please see #432- 22.7'.

The NC parts design is for a bare boat for the builder to finish, but we can take it further with consoles, cabins and other revisions and alternatives if desired. This 24' design and it's close relatives are relatively easy hulls to build. There are fewer NC parts than other designs by virtue of eliminating the NC Cut topside stringer and topside frames. Topside stiffening is provided by a split pipe rub strake and by two internal topside frames (one of which may serve as a chase trunk) that are hand cut. For future kits, we can provide NC parts for these items if desired.

Though a relatively simple hull, there is ample opportunity to exercise fabrication skills in the details and outfitting, as shown in the pictures. (Photos courtesy of Winninghoff Boats.)

Particulars:

Length (hull):

Beam (hull):

Wt. as rigged:

Wt. Bare Hull:

Deadrise Angles-

Transom:

Sta. 4:

Cutwater:

24' - 3"

8' - 2" (w/o rub rails)

3,000# (150 hp OB, batt sys.)

2,165# (w/ console)

Scantlings:

Bottom:

Bot. Stringers:

Chine Flats:

Sides:

Side Stringers:

Decks:

Transverse Frames:

Transom:

Keelson:

.250"

Girder & 3.50" x .250"

.375"

.190"

Split Pipe Rub Strake

.190"

.190", Flanged

.250"

.375" x 4.6"

Stock Weight (approx.)-

Blank Plate: 2,815# (w/o tank & console)

Extrusion: 300#